BBC Type B equipment

eve-bbc-type-b-amplifierBBC Type B modular equipment was introduced in the mid 1950s, to replace the larger and more expensive post war Type A installations.

Based on a smaller and more readily available valve, the ECC81 (or 6060 with lower microphony) the Type B became a familiar sight in many BBC studios across the land, including of course the Radiophonic Workshop. It is surprising that so few appear to have survived!

RWS12

King of the roost was the AMC/5 microphone amplifier with fixed gain stages of 40 to 70dB. This had been developed from the earlier general purpose GPA/4 amplifier which was also used for microphone applications. Further down the gain chain was the C/9 line amplifier with 10dB in hand.

eve-bbc-type-b-installationAmplifiers were attached to specially designed frames, held in standard BBC issue 19″ racks.

Consoles were passive, constant impedance, utilising Painton stud faders and in some instances with quadrant faders, such as at the Radiophonic Workshop as seen here in the capable hands of Delia Derbyshire.

radiophonic-workshop-type-b-desk

BBC OBA Type 8 type amplifier

 

OBA 8 amplifier and psu

The OBA/8 system was introduced in 1938. Intended for portable use with war in Europe looming, it was more lightweight then predecessors and utilised a pentode valve for the first time in British amplifier design.

The whole system, designed for self operation, consisted of two OBA/8 amplifiers (one on standby), a passive MX/18 mixer, LSU/1 loudspeaker and comms.

bbc-oba_8

Many units, particularly the MX/18 mixer, continued to find a use long after peace had been declared, in provincial studios and of course the Radiophonic Workshop.

eve-bbc-mx_18

Here is a picture of Daphne Oram with three such passive mixers, which utilised wire wound constant impedance attenuators (and an OBA/8 in the foreground).

daphne-oram-with-bbc-passive-mixers

BBC OB Type 9 amplifier

EVE BBC OBA 9 in situ

The OBA/9 system evolved in the 1950s to replace OBA/8, with a smaller footprint and expanded facilities to meet the demands of outside broadcast engineers as the needs of broadcast expanded.

OBA 9 close up

The whole system was designed to be ‘portable’ of a fashion; consisting of an MX/29 passive mixer, OBA/9 valved amplifiers with high gain and power supply, along with monitoring amplifier and distribution facilities. Ancillary items included a loudspeaker LSu/11 and communication units CMU/9 and CMU/10

bbc-oba_9-trolley